Model Number

SK-FD

Index,Water pressure: 0.02~0.8MPa
Power supply: 1 piece of 3.6V/6A/h lithium dry battery,it can be used in 5 years or so in normal state.
Induction distance: 50~250mm
Ambient temperature: 0~55 Degree
Diameter of in-out let pipe: G1/2
Material: ABS control box, copper plated with chrome faucet shell.
Installation, please refer to the picture

Method of use,After the inducting faucet is installed correctly, when hand or other object goes into the inducting zone, the faucet will induct automatically and turn the water on; when leave the faucet, the faucet will turn the water off automatically. When being used more than 1 minute, it will turn off automatically, if using again, it needs to be inducted again after keeping away the faucet.
Features and functions ,1. Mini electric motor drive, small volume (only Φ10mm), low power consumption (dynamic current: 30mA, one tenth of electromagnetic valve), high reliability.
2. Single-stationary-state fluidic valve adopts the technology of controlling water through water pressure, no mechanic wear, quite small strength of switch. It, high in reliability, small in volume, can be used normally under 8kg water pressure.
3. No electric contact, no electric contact firing and adhesion like the electromagnetic valve, it is high in reliability.
4. Design of preventing from obstacles, no special demand to water quality.
5. The products are sanitary, safe, energy-saving, reliable, and strong in capacity of anti-interference.
6. The control circuit is designed to be high in consumption-saving effect (static current 0.002mA, dynamic current 30mA), and double power-saving dormancy circuit.
7. Adopting lithium dry battery with a large capacity, it can be used more than 400 thousand times (5 years or so). It is not necessary to change the battery frequently.
8. No strong power like power pressure transmission and electromagnet, it is good in safety.
9. It's designed to be turned off automatically when the water is flowing more than 1 minute to avoid water wasting caused by obstacles in the induction zone.
10. Simple in installation, battery driving. Circuit wiring is not needed, it only needs to be connected with the in-out let pipeline and insert the water-proof lead, the faucets can automatically enter into normal operation procedure.
11. Adjust inducting distance automatically, good adaptability to the surroundings.
Maintenance ,1. Keep the inducting faucet clean, when blot is found, wipe the faucet with clean soft cloth.
2. When the flux of the faucet is too small, unload the control box and flush it rightabout and install over again.